|
LM TURBINE MECHANICS:
|
|
Top mounted rear facing to fit PJ-W® Jakadofsky Turbine unit.
|
|
All CNC Aluminum parts.
|
|
60mm Wide Aluminum side frames.
|
|
12mm Main Shaft - 240mm or 347mm long.
|
|
Left or Right hand rotation.
|
|
950 or 1250 Rotor head RPM.
|
|
Spiral Bevel Delrin main gears. |
|
Delrin Swashplate guide.
|
|
3 aluminum Push - pull Bell cranks with double Bearings for 120 deg CCPM.
|
|
Black Anodised Side Frames and bottom Mounting Runners.
|
|
Remander of Mechanics are Clear Anodised.
|
|
Made in England.
|
The photo to the right shows the on-board ECU and hardware that is included
with the Jakadofsky Turbines.
Photos below show our top mounted mechanics with different mast arrangements and our
assembly area where LM Mechanics are expertly prepared.
|
|
TURBINE TECHNICAL DATA:
|
|
Diameter: 4.4 inches.
|
|
Length: 9.5 inches.
|
|
Input RPM: 30.000rpm - 80.000 rpm.
|
|
Output RPM: 6.000rpm - 16.000 rpm.
|
|
Exhaust gas temp: 400 deg C to 500 deg C.
|
|
Fuel: Jet A1 & Kerosene |
|
Fuel Consumption: 3.3 oz / min at Full Power.
|
All photos are the property of Len Mount Scale Fuselages and are not to be copied or reused without permission.
